Rubber Top Lid | Polyurethane Top Lid | Hydrocyclone Top Lid Liner ( PU , Urethane )

Hydrocyclone Top Lid Is One Parts Of Feeding Box , This Accessory Is Only Applied To The Inlet Box Of Large-Scale Hydrocyclone. The Inlet Part Of Small-Scale Hydrocyclone Is Integral, The Inlet Box Of Large-Scale Hydrocyclone Is Split, And Top Lid Is Split Upper Part. Especially For Cyclones Above Fx500, This Part Is Very Common.
It Is Very Difficult To Produce The Inner Liner Of Large Hydrocyclone, So This Part Is Very Important. Its Tightness Is Directly Related To Whether The Hydrocyclone Can Be Used Normally. Considering The Shrinkage Of Rubber And Polyurethane, It Is Difficult For This Part To Be Tightly Combined With Other Parts. Our Company Has Breakthrough Research In This Technology, And Has Rich Production Experience, Which Can Ensure That The Confidentiality Is Extremely Good And Safe To Use.
The Company Has Successfully Produced A Complete Set Of Rubber Lined Accessories For The Fx838 Large Hydrocyclone, The Largest Copper Mine In Mongolia, Especially The Tightness Of Top Lid, Which Has Won The Unanimous Praise Of The End Users.
Hydrocyclone Top Lid From Our Company Can Be Use Wear Resistant Rubber Hydrocyclone Top Lid , Polyurethane Hydrocyclone Top Lid ( PU , Urethane ) And Silicon Carbide Hydrocyclone Top Lid ( SiC) For this Materials.
Product Features And Performance :
High Wear Resistance: Wear Resistance Is One Of The Most Important Basic Properties Of Hydrocyclone Lining. The Most Important Use Value Of Installing Lining Is High Wear Resistance.
Impact Resistance: The Elastic Properties Of Rubber And Polyurethane Provide More Reliable Guarantee For Impact Resistance.
High Strength: Especially For The Impact Of Water Hammer On Hydrocyclone.
High Corrosion Resistance: Isolate The Contact Between The Medium And The Steel Frame To Prevent Corrosion Of The Outer Wall Of The Steel Structure.
Acid, Alkali And Corrosion Resistance: The Corrosion Of Acid, Alkali And Salt Is Very Strong, High Performance Rubber And Polyurethane Lining Must Be The First Choice.
Protect The Skeleton From Chemical Damage. Other Chemical Corrosion Can Still Be Effectively Prevented.
Slow Down Dirt: The Inner Surface Is Smooth And Not Easy To Accumulate Viscous Medium.
Strong Adhesion Of Lining: High Performance Rubber Is Firmly Lined Inside The Steel Parts.
Low Running Resistance Can Reduce Energy Consumption: Smooth Inner Wall Can Increase Working Efficiency And Reduce Friction Resistance.
Transmission Medium Resistance Is Very Small: Effectively Avoid The Generation Of Classic.
It Can Be Transported By A Variety Of Fluid Media: Almost Any Liquid Media Can Be Transported.
The Service Life Can Be More Than 5 Years: High Service Life, Enhance The Working Efficiency Of Hydrocyclone.
Energy Saving, Environmental Protection And High Efficiency: Low Replacement Frequency, Thus Reducing The Waste Of Lining.
High Temperature Resistance: Compared With The Case Without Lining, It Can Improve The Working Temperature Range.
Suitable For A Wide Range Of Temperatures: 30 ℃ Below Zero To 80 ℃ Above Zero
Main Delivery Medium: Wear Corrosion Medium, Mud Medium.
It Can Reduce The Impact Wear Of The Conveying Medium On The Steel Tube Frame Wall
It Is Light In Weight And Easy To Install, Maintain And Transport; The Density Of Rubber And Polyurethane Is Only One Eighth Of That Of Steel Products, So It Is Light, Easy To Install, Reduce Transport Pressure And Easy To Maintain And Operate.