Rubber Extruder Process Rubber Hose For Pipe Liner

Rubber Extruder Process Rubber Hose For Pipe Liner

The Working Principle Of Rubber Extruder Is To Complete All The Above Processes Through a Barrel With a Screw And a Spiral Channel. Rubber Raw Materials Are Fed Into The Barrel Through a Real Hopper Of The Barrel, And Then Transmitted To The Other End Of The Barrel Through a Screw. In Order To Have Enough Pressure, The Depth Of The Thread On The Screw Decreases With The Increase Of The Spacing Of The Hopper.

The External Heating And The Internal Heating Caused By Friction Between The Rubber Raw Material And The Screw Can Soften And Melt The Rubber Raw Material. The Design Requirements Of Extruder Are Often Different For Different Polymer And Different Applications.

Many Options Involve Discharge Outlet, Multiple Feeding Ports, Special Screw Mixing Device, Melt Cooling And Heating, Or No External Heat Source (Fully Heated Extruder), The Relative Size Of Gap Change Between Screw And Barrel, And The Number Of Screws.

For Example, Compared With Single Screw Extruder, Twin Screw Extruder Can Make The Melt Mix More Fully. Series Extrusion Is a Melt Extruded By a Rubber Extruder. It Is Used As Raw Material To Supply Second Rubber Extruders. It Is Usually Used To Produce Extruded Polyethylene Foams.

The Rubber Hose In The Rubber Lined Pipe Produced By Jinruida Group Is Made By Rubber Extruder.